Cardo Systems Scala Rider PACKTALK, User Manual

Page: 12 / 120

5.2a “1+8” INTERCOM TOGGLING
(with PACKTALK, G9 / G9X and cardo SHO-1)
Pair with up to 8 other devices (“1+8” Buddies) and connect with them one at a time by
saying their name.
CONFIGURE YOUR BUDDY NAME
Before using “1+8” Intercom, you should assign yourself a Buddy name, so that other
paired Buddies can call you by this name. Visit the Cardo Community to configure your
Buddy Name (see Section 3).
Until you configure a Buddy name, your unit will be known as “PACKTALK”.
If you change your Buddy name, you must pair again with your “1+8” Buddies for their
devices to receive the new name.
Hear Your
Buddy Name
In Standby, press
Z
and v simultaneously for 2 seconds. You will hear your
Buddy name through the speakers.
Check Your
Buddy List
Check via the Cardo SmartSet and Cardo Community . You can also hear your
Buddy List through the speakers: In Standby, press
Z
for 2 seconds
PAIRING “1+8” BUDDIES
There are three ways to pair with “1+8” Buddies:
OPTION 1: Via the Cardo Community® (see 3.1)
g
OPTION 2: Via the Cardo SmartSet App (see 3.2)
☛
OPTION
3: Manual “1+8” Pairing
1. In Standby, press Z for 5 seconds to enter “1+8” Pairing mode.
2. Enter “1+8” Pairing mode on the second unit.
3. A purple LED for 2 seconds indicates pairing was successful.
If your scala rider already has a full list of 8 paired “1+8” Buddies, pairing another buddy will
replace the buddy that you have not spoken to for the longest time.
CALLING “1+8” BUDDIES
There are three ways to start an intercom call with “1+8” buddies.
OPTION 1: Voice Command (VOX)
Say any word loudly into the microphone. When you hear the Voice Command tone,
say the name of a ”1+8” Buddy i.e. “John Smith”. VOX Operation settings must be set
to “Voice Command” (see section 3).
☛
OPTION 2: Manual Mode
SAY THE NAME CHOOSE THE NAME (from your Buddy List):
Tap Z and say
the Buddy name
In Standby, press
Z
for 2 seconds to hear your Buddy List.
When you hear the name of the Buddy you wish to call, tap
Z
or say any word loudly into the microphone.
To cancel Buddy List playback: Press
Z
for 2 seconds.
g
OPTION 3: Via the Cardo SmartSet App (see 3.2)
12
|