CARDIOSTRONG Ergometer BX50, Assembly And Operating Instructions Manual

Page: 34 / 52

BX 50
34
3.4.7 Recovery
1. Press RECOVERY after the pure training time and grasp both handles.
All function displays stop except for TIME. It counts down from 00:60 to 00:00 (fig. 44).
L
NOTICE
When the console detects a pulse signal, the LCD screen displays RECOVERY SCANNING. When
the console does not detect a pulse signal, the LCD screen reminds of it by displaying PULSE
INPUT! The screen displays your recovery pulse status with F1 to F6 (fig. 45). F1 stands for the
best value, F6 for the worst. Continue training to improve your recovery pulse.
2. Press RECOVERY again to return to the main display.
3.4.8 Save Data
1. When you want to check the data, press the mode selection in the main programme and press
RECORDED DATA. Then press UP/DOWN to see the previously saved data (fig. 57).
2. Choose the date and press SAVE.DELETE. Confirm the deletion of the saving with ENTER (fig. 58).
3. Delete all data: Press SAVE.DELETE for six seconds in the calendar setting or in the RECORDED
DATA control. DELETE ALL! is displayed (fig. 59). Confirm with ENTER.
→
All data are deleted (fig. 60).
L
NOTICE
The computer reboots after 15 seconds and returns to the calendar default 20170101.
Fig. 44 Fig. 45
Fig. 46 Fig. 47