BX
50
19
Step 7:
Assembling the saddle, the seat post and the saddle rail
Required tools: 4 mm Allen wrench and socket wrench
1. Remove the nuts (
H1
) and washers (
H2
) on from underneath the saddle (
H
).
2. Place the saddle (
H
) on the seat basement (
F2
).
3. Attach the saddle (
H
) to the seat basement (
F2
) with the nuts (
H1
) and washers (
H2
) previously
removed.
4. Loosen and pull out the knob (
A46
) on the main frame (
A
) a little and slide the seat tube (
F
) into
the seat post of the main frame (
A
).
5. As soon as the seat tube (
F
) has reached the desired height, release the knob (
A46
).
6. Retighten the knob (
A46
) firmly.
⚠
CAUTION
Make sure that the rotary knob (
A46
) engages firmly in
one of the holes in the seat tube (
F
).
7. Remove the bolt (
J11
) on the seat tube (
F
).
8. Loosen the knob (
F4
) on the saddle rail (
F2
).
ड
ATTENTION
In the next step, Styrofoam is pressed out of the
saddle rail. Remove the polystyrene only after the
saddle basement (
F2
) has been attached to the
seat tube (
F
).
9. Slide the saddle basement (
F2
) onto the seat
tube holder (
F
).
10. Now remove the polystyrene.
11. Retighten the knob (
F4
).
⚠
CAUTION
Make sure that the rotary knob
(
F4
) engages firmly in one of the
holes in the seat tube (
F
).
12. Replace the previously removed
bolt (
J11
) on the seat tube (
F
).
Summary of Contents for Ergometer BX50
