CARDIOSTRONG CST-FX80, Assembly And Operating Instructions Manual

Page: 32 / 56

FX 80
32
3.5.4 User-Defined Programmes (U)
One user-defined programme with 16 segments can
be stored per user.
1. Select the user-defined programme (U) with the
UP/DOWN buttons and confirm with the MODE
button (Figure 6).
The first LED segment in the display flashes (Figure 7).
2. To set the resistance levels (1–24) for the
individual segments, use the UP/DOWN buttons
and confirm each of the 16 segments with the
MODE button.
L
NOTICE
One LED corresponds to four resistance levels.
L
NOTICE
To leave the programme earlier, press and hold
the MODE button for two seconds.
After entering the 16 segments, the time flashes.
3. Set the training time with the UP/DOWN
buttons.
4. To start the programme, press the START/STOP
button.
L
NOTICE
During the workout it is possible to adjust the resistance level for each segment with the
UP/DOWN buttons.
5. To pause the programme, press the START/STOP button again.
6. To end the programme, briefly press the RESET button in the paused programme.
Figure 7
Figure 6