EX
90
9
1.3
Electrical Safety
⚠
DANGER
+
In order to reduce the risk of an electric shock, always unplug the equipment from the
mains socket immediately after your workout, before assembly or dismantling, and before
maintenance or cleaning. Do not pull on the cable.
⚠
WARNING
+
Do not leave the equipment unattended while the mains cable is plugged into the mains
socket. During your absence, the mains cable must be removed from the mains socket to
prevent improper use by third parties or children.
+
If the mains cable or plug is damaged or defective, contact your contract partner. Until
repair, the equipment must not be used.
࣑
ATTENTION
+
The equipment requires a mains connection of 220-230 V with 50 Hz mains voltage.
+
The equipment may only be connected directly to an earthed socket using the supplied
mains cable. Extension cables must conform to VDE guidelines. Always completely unwind
the mains cable.
+
The socket must be protected by a fuse with a minimum fuse rating of "16 A, slow blow".
+
Do not make any changes to the mains cable or the mains plug.
+
Keep the mains cable away from water, heat, oil and sharp edges. Do not route the mains
cable underneath the equipment or under a carpet or rug, and do not place any objects on
top of it.
Summary of Contents for CST-EX90
