CARDIOSTRONG CST-BC70-B, Assembly And Operating Instructions Manual, Page: 16 / 52

BC 70
16
Step 3: Assembly of the upper handles and the console
(1) Set the upper handles (IV-D) on the iron plate of the console mast (IV-E) and mount
with two nuts (IV-N9).
(2) Loosen the four screws (IV-H1) from the console (IV-H)
(3) Connect the sensor cables (IV-E1 and IV-E2) from the console mast with the cables
from the console. Make sure that the cables are properly connected with each other.
(4) Push the cable carefully into the console mast and mount the console (IV-H) on the
console mast (IV-E) with two screws (IV-H1).
(5) Release the two screws (IV-N14) from the central tube (IV-E), equip the bottle holder
(IV-J1) with the central tube (IV-E) by the two screws (IV-N14).
IV-H
IV-D
IV-N9
IV-H1
IV-E
IV-E2
IV-E1
IV-J1
IV-N14