Cardinal Floor Hugger, Owner'S Manual

Page: 4 / 10

2
INSTALLATION
The following section outlines procedures for unpacking and installation of your scale.
Read this entire section carefully before attempting to unpack or install this scale.
FIGURE No. 1
Inspect the shipping container for any signs of damage such as exterior dents and scratches. It is
the responsibility of the purchaser to file all claims with the shipping company for damages or loss
incurred during transit, unless this responsibility has been accepted by the Seller in its proposal.
Scale should remain packed until you are ready to install it, protecting it while being stored.
Remove shipping bands and packing material. Make certain "all" packing material is
removed. Remove wooden box containing load cell cable from pallet. Place on scale
platform until further instructions are given.
BE CERTAIN scale location is level and free of debris.
Using the lifting eye bolt provided, move scale to final location (selected scales).
DO NOT push or slide scale, damage to load cells may result.
Once you have positioned the scale in its final location, shim or grout under each corner plate to
level scale. Make certain weight is evenly distributed over each of the four corner plates.
Figure No. 2