Cardinal Floor Hugger, Owner'S Manual

Page: 3 / 10

1
PRECAUTIONS
Before using this indicator, read this manual
and pay special attention to all "WARNING"
symbols:
IMPORTANT ELECTRICAL
WARNING
INTRODUCTION
Your low profile platform scale is designed and
manufactured with quality and reliability.
Optional inclined ramps may be installed for
easy approach and exit of scale. Four electronic
load cells support the scale platform and are
connected at a centrally located junction box
where calibration adjustments may be made.
These load cells are self-checking and
environmentally sealed.
A lifting eye bolt is shipped with selected scales
and should be conveniently stored, along with
the shipping bolts, after completion of scale
installation. The shipping bolts and lifting eye
bolt will need to be re-installed if scale is
relocated in the future.
Your low profile platform scale has been factory
calibrated to perform within the specifications set
forth in Handbook #44 issued by the United
States Department of Commerce, National
Institute of Standards & Technology, as a "legal
for trade" weighing device. If re-calibration is
required upon completion of installation, such
procedures should be performed by a scale
technician familiar with calibration and
performance requirements of Handbook #44.
This manual provides instruction for unpacking,
installing and calibration of your scale. A
Trouble Shooting Guide was written so you may
isolate or correct a problem before calling a
scale technician.
Please read this manual thoroughly and pay
special attention to the warning symbols.
COPYRIGHT
All rights reserved. Reproduction or use, without
express permission, of editorial or pictorial
content, in any manner, is prohibited. No patent
liability is assumed with respect to the use of the
information contained herein.
TABLE OF CONTENTS
Introduction ........................................................ 1
Installation ......................................................... 2
Calibration Procedure ........................................ 3
Trim Adjustment ................................................ 4
Trouble Shooting Guide..................................... 5
Interconnection Diagram ................................... 6
FCC COMPLIANCE STATEMENT
This equipment generates uses and can radiate
radio frequency energy and if not installed and
used in accordance with the instructions in this
manual, may cause interference to radio
communications. It has been tested and found to
comply with the limits for a Class A computing
device pursuant to Subpart J of Part 15 of FCC
Rules, which are designed to provide
reasonable protection against such interference
when operated in a commercial environment.
Operation of this equipment in a residential area
is likely to cause interference in which case the
user, at his own expense, will be required to
take whatever measures may be required to
correct the interference.
DISCLAIMER
While every precaution has been taken in the
preparation of this book, we assume no
responsibility for errors or omissions. Neither is
any liability assumed for damages resulting from
the use of the information contained herein. All
instructions and diagrams have been checked
for accuracy and ease of application; however,
success and safety in working with tools depend
to a great extent upon the individual accuracy,
skill and caution. For this reason, we are not
able to guarantee the result of any procedure
contained herein. Nor can we assume
responsibility for damage to property or injury to
persons occasioned from the procedures.
Persons engaging the procedures do so entirely
at their own risk.
Serial Number ______________________
Date of Purchase ___________________
Purchased From ____________________
___________________________________
___________________________________
___________________________________
RETAIN THIS INFORMATION FOR FUTURE USE