18
MEMORIZZAZIONE CODICE TX-TX
TRQ504
29-10-2013
DM0910
Description :
Product Code :
Date :
Drawing number :
P.J.Heath
CARDIN ELETTRONICA S.p.A
- 31020 San Vendemiano (TV) Italy - via Raffaello, 36 Tel: 0438/401818 Fax: 0438/401831
Draft :
All rights reserved. Unauthorised copying or use of the information contained in this document is punishable by law
MR
A
MR
B
1
2
3
MEMORIZZAZIONE CODICE TX-TX
TXQ504C4
29-10-2013
DM0911
Description :
Product Code :
Date :
Drawing number :
P.J.Heath
CARDIN ELETTRONICA S.p.A
- 31020 San Vendemiano (TV) Italy - via Raffaello, 36 Tel: 0438/401818 Fax: 0438/401831
Draft :
All rights reserved. Unauthorised copying or use of the information contained in this document is punishable by law
A
MEMORIZZAZIONE CODICE TX-TX
TXQ504C4
29-10-2013
DM0912
Description :
Product Code :
Date :
Drawing number :
P.J.Heath
CARDIN ELETTRONICA S.p.A
- 31020 San Vendemiano (TV) Italy - via Raffaello, 36 Tel: 0438/401818 Fax: 0438/401831
Draft :
All rights reserved. Unauthorised copying or use of the information contained in this document is punishable by law
B
• Memorizing more transmitters by using a previously memorised transmitter.
This procedure allows you to enable a new transmitter (from a remote position) with the help of a transmitter that has
already been memorised in the system. As the presence of the receiver is not required this procedure can be carried out
in any remote location (for example in your chosen sales outlet).
Access to the "rapid memorizing" procedure can be enabled or disabled on the receiver by moving dip 4 of dip-
switch D1.
• Dip 4 ON
R.MEMO
inserted: the rapid memorization procedure is enabled.
• Dip 4 OFF
R.MEMO
not inserted: the rapid memorization procedure is disabled.
- Remove the upper cover from the transmitter to be memorised and from the transmitter that has already been memo-
rised as shown in the drawing below (det. a).
- Place the transmitter
A
, that has already been memorised in the receiver, beside the new transmitter
B
(det. b).
- Using a pointed object press and release the
MR
button on both transmitter (in sequence or simultaneously).
- The orange LEDS on the transmitters will flash slowly.
- Press and release a channel button on transmitter
A
that is already present in the receiver (det. c).
- The led of the new unit
B
will remain lit for 3 seconds to confirm memorization (det. d).
Transmitter
B
will now command the receiver exactly like transmitter
A
.
3
Summary of Contents for RPQ504T10
Page 50: ...50 Notes ...
Page 51: ...51 Notes ...
