![background image](http://html1.mh-extra.com/html/cardin/morph433w00/morph433w00_manual_2555986020.webp)
20
9 10
GND
EN
When the interface receives a preciously memorised code it sends the following sequence of
characters to the PC via USB:
R/X1-X2X3X4X5X6X7X8X9X10-X11.
Where X1 represents the transmitted channel (A,B,C or D), X2-X10 the transmitted code, while
X11 can either be equal to E if the interface is enabled or D if it is disabled.
If the characters &IC are sent the interface answers with a sequence of characters that rep-
resents the actual settings.
Note 1:
The first bit to be transmitted in the output sequence is bit 1
1) WIEGAND 26 bit
Attention!
The code is limited to
16’777’215
. To use codes with greater numbers, consult the para-
graph "
Code truncation
" on page 25
2) WIEGAND 26 bit with site code
Attention!
The code is limited to
65’535
. To use codes with greater numbers, consult the paragraph
"
Code truncation
" on page 25
3) WIEGAND 26 bit with site code and channel information
Attention!
The code is limited to
65’535
. To use codes with greater numbers, consult the paragraph
"
Code truncation
" on page 25
WIEGAND PROTOCOL (BIT FLOW SEQUENCE)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
"even parity bit" for the bits 2-13
"odd parity bit" for the bits 14-25
binary code output (10 msb, 25 lsb)
1
S1
2 3
ON
4
= "000001"
bit 8 bit 9 CH
0 0 A
0 1 B
1 0 C
1 1 D
channel information
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
"even parity bit" for the bits 2-13
"odd parity bit" for the bits 14-25
binary code output (2 msb, 25 lsb)
1
S1
2 3
ON
4
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
"even parity bit" for the bits 2-13
"odd parity bit" for the bits 14-25
binary code output (10 msb, 25 lsb)
1
S1
2 3
ON
4
site code = "00000001"
Summary of Contents for MORPH433W00
Page 50: ...50 NOTES ...
Page 51: ...51 NOTES ...