22
beep
beeeeep
beep
beep
STAGE 1
STAGE 1 - NOTE
STAGE 2
STAGE 3
Press the desired channel on
the mobile unit: The unit will
emit one "beep" and send the
signal to the fixed-position
unit.
If the mobile unit is not
memorized on the fixed-
position unit or you are
out of radio signal range,
the mobile unit will emit a
single long beep after a few
seconds has passed.
The fixed-position unit receives the
signal and activates the relay (in
the set mode impulsive or ON/OFF)
that corresponds to the transmitted
channel. The fixed-position unit
sends a confirmation signal to the
mobile unit as well as a relay status
signal (open / closed).
The mobile unit emits two confirmation
beeps and displays the relay contact
status as follows:
If the relay module is not
inserted or is damaged:
no Leds will light up.
contact lit led
closed blue
open orange
TRANSCEIVER SYSTEM FUNCTION
