SYSTEM MANAGEMENT OPERATIONS
• Memorizing a channel code
• Deleting a channel code (via an associated mobile transceiver unit)
• Deleting the entire code memory (users)
• Memorizing ulterior mobile transceiver units
Attention!
Do not memorize the same channel on two stationary transceivers close to each other
(within the same range of the mobile unit)
• Memorizing a channel code
- Move the mobile unit near to the fixed unit.
- Press and hold down the
MEMO
button on the fixed unit and LED
LGC
will flash slowly
- Press the button (channel) you wish to memorize on the mobile unit.
- The LED LGC on the fixed unit will flash rapidly and the mobile unit will emit two beeps.
- Press the button (channel) you wish to memorize on the mobile unit a second time. The LED
LGC
on the
fixed unit will glow continuously and the mobile unit will emit two beeps. After a few moments Led
LGC
will switch off.
- Release the
MEMO
button. End of operation.
• Deleting a channel code (via an associated mobile transceiver unit)
- Move the mobile unit near to the fixed unit.
- Press and hold down the
DEL
button on the fixed unit and LED
LGC
will flash rapidly.
- Press the button (channel) you wish to delete on the mobile unit.
- The LED
LGC
on the fixed unit will glow red continuously and the mobile unit will emit two beeps.
- After a few moments Led
LGC
will switch off.
- Release the
DEL
button. End of operation.
• Deleting the entire code memory content (users)
- Press and hold down the
MEMO
and
DEL
buttons for more than 4 seconds on the fixed unit.
- LED
LGC
will remain lit for the entire duration of the deletion, which lasts for about 3 seconds
- LED
LGC
will flash for a few moments and then switch off.
- Release the buttons. End of operation.
19
