70-00969-01 F
Powerheart® AED G3 Pro 9300P
3-6
How to Perform a Rescue
Step 3: Place pads
Note:
Cardiac Science’s standard defibrillation pads are non-
polarized and can be placed in either position as shown on the
pad package.
If you are using model 9660 polarized pads, see the diagram on the
package for specific placement of each electrode.
When the AED prompts…
Do this…
“Tear open package and remove
pads.”
1.
Keeping the pads connected to the AED,
tear open the package.
2.
Remove the pads from the package.
Leave the package attached to the pad
wires.
“Peel one pad from plastic liner.”
With a firm, steady pull,
peel one pad away from
the blue plastic liner.
It does not matter which
pad to use.
Note:
Do not pull on the
lead wires.
“Place one pad on bare upper
chest.”
Place the pad
without the
liner on the
bare upper
chest as
shown.
“Peel second pad and place on
bare lower chest.”
1.
Pull the blue liner from
the second pad.
Note:
Do not pull on
the lead wires.
2.
Place the pad on the
bare lower chest as
shown.
9131
9660
