ECGC-70-002, Rev. 8, February 05, 2019
9
Device Functions
1.
On/Record
If the device is off, pressing your fingers to the electrodes will turn the device on
and begin initiating a connection with the open application. NOTE: The ECG
Check device must be within 10 meters of the cellular device.
If the ECG Check application is not open, please start the application prior to
initiating a recording on the device. The device will not begin recording data
until the ECG Check application has been started and the blue
‘
Make a New
Recording
’
icon has been pressed.
2.
Standby / Power Off
The device will turn off automatically after the device has detected no skin
contact for 4 seconds. If there was an on-going test, the test will be invalidated
and need to be restarted.
NOTE:
The device starts recording when there is electrode contact with the skin
AND the cellular device application has connected with the ECG Check device
via Bluetooth to begin recording.
The ECG Check is not waterproof. Do not
allow it to get wet. Remove before
bathing or swimming.
Do not use or store the ECG Check in
extreme heat or cold.
