ECGC-70-002, Rev. 8, February 05, 2019
10
Do not use or store the ECG Check outside
of stated humidity levels.
Setup and Use of the ECG Check
Setup the ECG Check Device
Your ECG Check comes fully assembled. You will need to fully charge your ECG Check
prior to first use by following these steps:
1.
Unpack the USB cord that is provided with the ECG Check.
2.
Connect the USB cord to the charging port of the ECG Check, which is located on
the side of the device.
3.
Connect the USB end of the device to your computer, or to a wall adapter.
4.
Allow to charge for a full 8 hours before first use. When charging is complete,
remove the USB cord from the ECG Check and the computer and store in an easy
to find location so you will have it easily accessible for recharging when
necessary.
Download the ECG Check Application and Create your Account
1.
Download the ECG Check Application from the AppStore (iPhone) or Play Store
(Android).
2.
Ensure the Bluetooth setting is turned ON for the cellular device (i.e. iPhone) you
are using. If the Bluetooth setting is not on, refer to the instructions for use of
the cellular device to determine how to turn the Bluetooth on. NOTE: Bluetooth
must be ON for the ECG Check to connect to the ECG Check application on the
cellular device.
3.
Once downloaded, tap the ECG Check icon to open the application on the
smartphone.
ECG Check Application Icon
4.
Create your user profile and account by following the prompts.
5.
Keep the application open while making your ECG Recording with the ECG Check
device.
