T h e N e x t G e n e r a t i o n i n L o c k i n g
C F B - C S L F L I P B O L T M O R T I C E L O C K - C O N C E A L E D S H O R T L E V E R
2. DRILLING TEMPLATE INSTRUCTIONS
2A
Insert lock into
door cavity.
ENSURE BOLT IS
EXTENDED.
2B
Secure with
2x M4x16mm CSK
Screws (supplied
with lock).
LINE UP WIT
H SPINDLE
CTR
LINE
ON
LOCK
DRILL
14 to 19
DRILL
9
DRILL
9
DRILL
9
19 X 33 LO
NG
SPI
NDLE
C
TR
L
INE
EXTRUSION
THICKNESS
BACKSET
TOP
LINE UP WITH SPINDLE
CTR LINE ON LOCK
BACKSET
EXTRUSION
THICKNESS
TOP
DRILL
8
2C
Insert drilling template
into cutout and against lock
face as shown.
Identify the colour that lines
up (closest) with the door
edge face.
2E
Remove the 2x
M4x16mm CSK
Screws and lock
from the door.
2F
Drill the following
holes as shown on the
diagram.
Clean up opening for
fitment of oval cylinder.
Drill Ø9 hole
Drill Ø19 holes
Drill Ø14 to 19 hole
Drill Ø9 holes
2G
Preparation for installation of
concealed short lever furniture and
lock into metal door is now
complete.
Continue with concealed short lever
furniture installation instructions
section 3.
2D
To determine the correct
backset position, align the
corresponding same coloured line
at the top and bottom, as shown
on the diagram.
Ensure template is straight.
To determine the vertical position
of the template, align the spindle
ctr line with the spindle line on the
lock
Mark drilling holes.
LINE UP WITH SPINDLE CTR LINE ON LOCK FRONT FACE
BACKSET
EXTRUSION THICKNESS
TOP
DRILL
8
SPINDLE
CTR LINE
DRILL
14
DRILL
8
DRILL
8
LINE UP WITH SPINDLE CTR LINE ON LOCK
DRILL
14 to 19
DRILL
9
DRILL
9
DRILL
9
19 X 33 LONG
SPINDLE
CTR LINE
EXTRUSION THICKNESS
BACKSET
TOP
Spindle
Line
