C F B - C S L F L I P B O L T M O R T I C E L O C K - C O N C E A L E D S H O R T L E V E R
T h e N e x t G e n e r a t i o n i n L o c k i n g
Distributed in Australia by
LOCK AND KEY a division on the
DAVCOR GROUP PTY LTD ABN 95 003 562 598
This product has been manufactured in China
to Lock and Key Company specifications
This product is guaranteed to be free from defects in materials and
workmanship for a period of one (1) year from the date of original
purchase. This warranty is for replacement of product only and Lock
and Key Company does not accept responsibility for any direct or
consequential damage caused by this product or its use. This warranty
does not cover damage
that results from faulty installation or usage,
alteration or modification of the product or tarnishing of the finish
including colour change due to weather, salt or chemical. Should this
product not perform satisfactorily in its intended application, return it
to place of purchase for replacement.
LOCK & KEY
Phone:
1300 652 692
Web:
www.locknkey.com.au
Web:
www. daveweb.com.au
NOTE
Please dispose of plastic
bags and other packaging
in a thoughtful manner
WARNING
Please keep contents
away from small children.
Suffocation Hazard.
5C
Rotate the short lever counter-clockwise
90° as shown on the diagram.
5D
Whilst spring is as shown, replace short
lever back into door furniture and securely
re-fasten the central handle mounting screw.
5E
Test the short lever rotation to ensure the
position is in right-hand configuration.
5F
Rotate the short lever counter-clock-
wise 90° into the downward position as
shown on the diagram.
5A
Remove central handle mounting
screw using supplied 3mm allen key.
5B
Remove short lever together with
nylon bearing washer and hub.
Ensure parts are kept assembled together.
6. INSTALLATION OF CONCEALED SHORT LEVER
6D
Insert oval key cylinder
with CSL cam and secure
with retainer pin.
Check retainer pin is flush
with lock body.
Insert oval key
cylinder and
retainer pin
if required.
6E
Insert oval key cylinder
and secure retainer pin if
required.**
Attach cover plate to lock
and secure with
2x M4x6mm CSK Screws.
**With rabbit ear / R cam fitted on
the oval cylinder.
6F
Installation is now complete.
6B
Whilst keeping the
furniture flush with the slide
plate, insert the supplied
2.5mm T-handle allen key
into the grub screw inside
the top of the cylinder hole.
Rotate the grub screw
clockwise until tight, sliding
the faceplate downwards
into its fitted position.
Remove allen key
afterwards.
Test lever operation.
Spring Position
Spring Position
Spring Position
Lever Down
Right-hand
Configuration
6A
Ensure short lever
is in the horizontal
position and the lock
bolt is extended.
Position the faceplate to
the door and insert the
spindle into the lock
drive and the faceplate
over the mounting
bosses.
Ensure lock bolt is extended
Mounting Boss
Mounting Boss
6C
Attach CSL cam to oval
key cylinder.
Special Notes:
For lock installation instructions, please refer to installation instructions provided with CFB-D / CFB-HB.
For installation together with CLS-FAB - Flip Bolt Latching Strike, please refer to the installation instructions provided with CLS-FAB.
For installation together with CFB-OCEP - Oval Cylinder Rectangular Escutcheon, please refer to the installation instructions provided with CFB-OCEP.
5. CHANGE OF HANDING TO RIGHT-HAND CONFIGURATION
