docs.carbide3d.com
8/26/2020
Version 1.0
3
Introduction
We’re here to help! If you encounter any issues during assembly, please contact us at:
The Z-Plus kit includes everything you need to upgrade your existing X/Z-carriage to the Z-Plus (X/Z+). The Z-Plus kit also
includes new inductive proximity switches to replace the original homing switches. There are minor differences in the
installation procedures between Shapeoko 3, XL, and XXL models AND between Shapeoko models shipped pre-Dec 2019 and
post-
Dec 2019. We’ve added special notes to
guide you whenever these differences require
alternate
instructions:
Throughout the guide you will also
find information that we’ve called out for you to pay particular attention to. We use
three types of call-outs, WARNINGS, NOTES, and PRO TIPS:
In this guide, any reference or instructions with regard to direction or placement, such as: Front, Back, Left, Right, etc. a re
given from the perspective of one standing in front of and facing the machine. This is true, even when a photo is taken from
the rear of the machine.
IMPORTANT Software Information
Run Carbide Motion 4.17 or later with the Z-Plus. Download Carbide Motion:
carbide3d.com/carbidemotion/download
Assembly Requirements
To carry out this upgrade, you need basic mechanical skills and an understanding of how the Shapeoko is assembled.
Installation takes approximately 2 hours.
Required tools:
•
Metric hex keys: 1.5mm
–
6mm
•
Wrenches: 8mm and 10mm
•
Needle nose pliers
•
Permanent marker
•
Tape measure or ruler
•
Scissors
•
Flush cut pliers
•
Masking tape
WARNING:
After installing the Z-Plus, you must update your GRBL settings.
DO NOT HOME UNTIL YOUR SETTINGS
HAVE BEEN UPDATED!
SPECIAL INSTRUCTIONS:
These call-outs will draw your attention to special instructions for different models.
WARNING:
This is a warning
—
pay close attention. Information in these boxes is very important.
NOTE:
This is a note
—
information that points out critical steps or information for future reference.
PRO TIP:
This is a pro tip
—
helpful additional information.
