docs.carbide3d.com
05/01/20
v1.1
1
BitRunner Quick-Start Guide
The Carbide 3D BitRunner automates your
router’s on/off functionality in Carbide
Motion. No more reaching into the working
envelope with a moving end mill. Power
down your router with the touch of a button
from your computer to perform tool changes
quickly and safely.
Use the BitRunner in conjunction with the
BitSetter and BitZero to automate your
cutting process even more.
BitRunner Kit
Item
Description
Qty
Note
A
BitRunner
1
BitRunner enclosure and attached power cords
B
Communications Cable
1
Gray 6-pin male-to-female extension cable
C
Mounting Hardware
2
M6 x 12mm button head cap screws
Kit Option 1:
Description
Qty
Note
Carbide Motion Board with BitRunner Connector
1
BitRunner connector already installed
(not pictured)
Cover for Carbide Motion Enclosure
1
Replacement for existing cover
(not pictured)
Kit Option 2:
Description
Qty
Note
BitRunner Connector
1
Must be soldered to current Carbide Motion board
(not pictured)
Cover for Carbide Motion Enclosure
1
Replacement for existing cover
(not pictured)
Which Shapeoko Model Do You Have?
Figure 1
