docs.carbide3d.com
08/19/2021
v1.0
13
Troubleshooting and Maintenance
3.1 Troubleshooting Guide
BitRunner V2 will
not turn on.
BitRunner V2 is not enabled
Press the control pendant button
to enable the BitRunner V2.
BitRunner V2 is not plugged into power.
Ensure BitRunner V2 is plugged
into a power outlet.
Cables are not correctly plugged in.
Ensure all cables are correctly
connected. In particular, check
correct connection of the logic
cable at the Shapeoko controller.
BitRunner V2
stopped working
suddenly.
The fuse may have blown if:
•
You know the G-code is good
•
Control pendant LED still lights up.
The fuse can blow if the router shorts or
if there is a short in your home.
Replace the old fuse with a new
15A 250V 5×20mm fuse. See
