docs.carbide3d.com
08/19/2021
v1.0
9
2.
Use an M5 screw to secure the ring terminal end of the grounding cable to one of the two M5 holes
on the left side of the spindle mount. See
Figure 7.
3.
Use a couple of zip ties to secure the grounding cable. Make sure the cable is secured where it will
not get in the way of the machine’s movements.
1.7 Upgrade Carbide Motion
The BitRunner V2 requires at least Carbide Motion 4.
1.
Check for the build number in the bottom-left corner of Carbide Motion. Build numbers higher than
400 do not need to be upgraded.
2.
If you have an older version, download the most recent version of Carbide Motion from
carbide3d.com/carbidemotion/download
and install it to your computer.
Figure 7
