8
MAINTENANCE
To clean the glass, be careful to spray the cleaning product on a cloth and clean only the glass, without
wetting the rest of the door. Window-cleaners and special products often contain chemicals that attack the paint
and the ceramic fibre seals and cause oxidation of the metal parts.
It is very important not to wet the woodburner with window-cleaner, water or special cleaning products.
Heatproof paint is not waterproof.
Clean the paintwork with a feather duster or a soft, dry cloth. If over time you want to repaint the insert, the
manufacturer makes a spray paint available from your dealer.
TIPS AND SAFETY STANDARDS
- You should check the chimney regularly and keep it clean and in good condition. Creosote build-up in the
chimney could cause it to catch fire.
- Warn children of the danger of burns.
- Do not modify the appliance without authorisation and use only original spare parts.
- The appliance must be installed on floors with sufficient bearing capacity.
- Observe the minimum safety distances from nearby combustible materials.
In front of the appliance: minimum 90 cm.
Combustible materials must not be installed on the appliance or inside
the brickwork.
- On days with adverse draught conditions (very low atmospheric pressure, heavy frosts), or when the flue is very
cold, or in chimneys with a poor draught, you can help the draught to start before lighting the fire by heating the flue:
1. Prepare the wood for lighting inside the woodburner.
2. Place a firelighter or a sheet of newspaper on the deflector at the start of the flue and set fire to it.
3. After a few seconds, when the chimney draught starts, light the wood as instructed.
Note.- The power cable must be connected by a plug to a multi-socket adaptor and it must be accessible once the appliance
has been installed. The power cable or electrical components must be changed or replaced only by qualified personnel to avoid
hazards.
ROCK WOOL
INSULATION
ELECTRICAL INSTALLATION SCHEMATIC
WORKING VOLTAGE 230 V
FREQUENCY: 50 Hz
INSTALLED POWER: 60 W
MULTI-SOCKET
ADAPTOR 230 V 50 Hz
PINS
S1
2 Positions
T1
2 Positions
R1
820 Ohms
Summary of Contents for C-100 Plus Double-sided
Page 12: ...12...
