Carbatec TJ-250P, Owner'S Manual

Page: 5 / 31

Specific Precautions Using Planer Thicknessers
05
pressure on the ‘front’ of the material i.e., that portion
of the stuff that has passed over the block, but use a
push stick or a pusher shoe to clear the end of the
stuff over the block.
Thicknessing
When thicknessing, remove the fence. Lower the
thicknessing table slightly. Unlock and swing both
tables ‘up and out of the way’,taking care not to foul
the overhand guard/arm assembly, which will
probably swing free. Turn the dust extraction hood
up and over the block.
Connect the dust extraction. Ensure the hose will not
foul any stuff being passed through the machine.
Check the height of the thicknessing table.
Engage the autofeed mechanism.
Periodically, clean any excess build up of resin from
the thicknessing table, and apply any proprietary
brand of lubricating agent.
NOTE, Consideration should be given to the type of
finish you will be applying to the surface when you
select your cleaning/lubrication agent.
Specifications
motor
2-hp 230v
cutterhead
64 insert knives
blades resharpenable
no-replaceable
workshop footprint
1100 x 800 x 1000mm
dust chute
1 x 4"
net weight
150kg
shipping weight
207kg
table type & size cast iron
table length 1050mm
table width 250mm
fence tilt 0-45°
specifications - thicknessing mode
max cutting width 250mm
max thickness of stock 180mm
min thickness of stock 3mm
feed rate 8 mpm
infeed roller serrated
outfeed roller steel
table type cast with rollers
table size 250 x 770mm