Version 10.05.2012
USB-MK-CD
S
eit
e
15
3.6.3.
Rear-view camera function
Set the rear-view camera setting to “RVC: ON“ to use
the rear-view camera input of the usbLOGiC. After the
setting the automatic switching to rear-view camera
input is activated when reverse gear is engaged.
Note:
After the reverse gear is disengaged, the monitor
stays on camera video until the vehicle reaches a speed
of 10 km/h. To leave the camera video press the right knob.
4.
Operation
4.1.
Activation of the video-in-motion function
The video-in-motion function is permanently active without disturbing the navigation
performance.
4.2.
Selecting the usbLOGiC as current AV-source
Selecting the usbLOGiC as current AV-source is activated by pressing
the “MODE”-button (depending on the current mode of the system, it
has to be pressed several times). After the first activation the system
will switch the picture after a few seconds from usbLOGiC-video to
factory-video by itself, the audio will still sty on usbLOGiC-audio. Use
the picture switch button to select between factory-video and
usbLOGiC-video. You can leave the usbLOGiC mode by pressing the “FM” or the “MODE”
button.
4.3.
Switching to usbLOGiC and factory CD-changer
The usbLOGiC and the factory CD-changer share a common address. The factory CD-changer
can be used only when the usbLOGiC is switched off. To switch the usbLOGiC off or on
longpress station button “
4
”.
4.4.
Switching to internal USB and AV-source
In usbLOGiC mode longpress station button „
1
” to switch to the internal USB or longpress
station button “
2
” to switch to the AV-input mode.
MODE - picture switch
button button
