Version 10.05.2012
USB-MK-CD
S
eit
e
10
3.3.5.
Radio module with round-pin connector WITHOUT factory CD-changer
Installation is analogue to system with factory CD-changer installed. Only there is no female
10pin connector on the vehicles harness. Shorten the female 12pin connector for two
chambers (after expelling all the pins). Obeying the above pin-configuration, pin the female
pins of the audio cable of harness C3C-BMW701 into the 10pin shortened female connector.
The male pins of the audio cable of harness C3C-BMW701 are not used and should be
isolated. Connect female round-pin connector to radio module. Connect the shortened
female10pin connector of harness C3C-BMW701 to the CD-changer port of the radio module
while making sure that the correct pins are used. Fasten the female 10pin connector in the
round-pin connector to avoid later disengagement.
