Version 11.02.2015
C4-LR12-NC
Pa
ge
5
3.
Installation
Switch off ignition and disconnect the vehicle’s battery! If according to factory rules
disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in
sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a
resistor lead.
Place of installation is on the rear of the factory monitor.
!Harness!!
C4C*LR02*NC!
Interface*box!
C4C*M816C!
FRONT!
!!!!
+12V!rear*view!camera!
!!!!!DeacEvaEon!AV1!
!!!!!AkEvaEon!NAV*buIon!
!!!!!(special!case)!!
Rear!of!!
factory!monitor!
Female!16pin!
connector!
vehicle!harness!
Rear!of!!
factory!monitor!
!IR*cable!
C2C*IR!
Factory!!
AUX!input!
