Version 11.02.2015
C4-LR12-NC
Pa
ge
10
Connect the AV-RCAs of AV-source 2 and the AV-RCAs of AV-source 3 to the female
RCA connectors of the respective AV-cable CAB-AV-6P (AV2/3).
Using the respective STA-xxx IR-control cable, interconnect the blue-black (yellow-
black) female 3pin AMP connector of IR-cable C2C-IR and the IR-port of the
AV-source 1 (AV-source 2).
Connect video RCA of AV-source 1 (NAV-NKSUNIR4) to female RCA connector NAV-
AV1 on the rear of the interface-box C4C-M816C by RCA-adapter CAB-RCA1-15.
See chapter “After-market navigation NAV-NKSUNIR4” for detailed information about
connection.
Note:
It is also possible to connect an AV-source without control by factory touch-
screen to AV1. In this case you need another AV-cable CAB-AV-6P (connection to 6pin
MicroFir connector AV1 on the rear of interface-box C4C-M816C).
3.4.2.
After-market navigation NAV-NKSUNIR4
Connect video RCA of NAV-NKSUNIR4 to female RCA connector NAV-AV1 on the rear
of the interface-box C4C-M816C by RCA-adapter CAB-RCA1-15.
Connect the round male 13pin connector of harness C4C-LR02-NC to the round
female 13pin RGB connector of the NAV-NKSUNIR4.
Connect the female 6pin connector of harness C4C-LR02-NC to the male 6pin
POWER connector of the NAV-NKSUNIR4.
1
2
3
1
2
3
AV#source*1**
A"er%market*naviga/on*
NAV%NKSUNIR4*
Interface#box*
C4C#M816C*
REAR*
Harness**
C4C#LR02#NC*
1*
2*
3*
*RCA#adapter**
CAB#RCA1#15*
