Version 19.10.2012
C2-MMi2G-x
P
age
12
4.
Operation
4.1.
Video-in-motion function
The video-in-motion function for the fed in video-signal is activated permanently without
disturbing the navigation performance.
4.2.
Selecting the c.LOGiC as current AV-source
After installation the c.LOGiC is identified as factory CD-changer
and is displayed as virtual (second) CD-changer in the “CD/TV”
and accordingly the “MEDIA” (in vehicles from year 2007) menu,
sub-menu “Changer” and is shown as “CD7 – VIDEO”.
Select ”CD7 – VIDEO“ by pressing the knob. The display shows
“01 – ON: - >“ and “02- OFF: - <“. The MMI switches to the first
activated input by pressing the “>” button. Each press of the “>”
button will switch to the next enabled input.
Disabled inputs will be skipped. If all inputs are enabled the
order is:
Factory video
RGB-in
AV-IN1
AV-IN2
Factory video
…
Pressing the “<” button will return to the factory video mode of the MMI navigation.
Note:
Please note that no repeat function is activated in the
Setup CD mode, otherwise it may get error messages.
