Version 19.10.2012
C2-MMi2G-x
P
age
11
3.4.4.
After-market navigation
Connect female 8pin connector of the RGB cable to the male 8pin connector of the
video-interface. The loose grey and the loose green wire have no function and have
to be isolated.
Connect male 6pin connector of the RGB cable to the after-Market navigation. The
loose blue wire has no function and has to be isolated.
3.5.
Picture settings
After installing the sources the picture settings can be changed using a pen on the buttons of
the video interface. Press the MENU button to open settings menu on the OSD and to switch
to the next setting. UP and DOWN change the corresponding values. The buttons are
embedded in the housing to avoid accidental changes during or after installation.
