Version 19.10.2012
C2-MMi2G-x
P
age
9
3.4.1.
AV-source(s)
The c.LOGiC interface has the possibility to connect and remotely control by navigation
buttons up to 2 pre-programmed devices. The device list in the device control table
(appendix A) shows the pre-programmed remote channels and the related IR-control cables
STA-xxx which must be ordered separately for the control of the device.
Note:
The two fix pre-programmed IR control channels are listed on the sticker on the back
of the video-interface.
Using the respective STA-xxx IR-control cable, interconnect the blue female 3pin AMP
connector of the interface connection cable and the IR-port of the AV-source. If 2 AV-
sources will be connected, plug the optional available IR-cable STA-Y between it.
Connect the video-RCA of AV-source 1 to the RCA-port IN1 and the video-RCA of
AV-source 2 to the RCA-port IN2 of the video-interface.
Connect the female 8pin connector of the audio cable zo the male 8pin connector of
the video-interface.
Connect the audio-RCA of AV-source 1 to the RCA-port AV1 and the audio-RCA of
AV-source 2 to the RCA-port AV2 of the audio cable.
