Carat X-COUP, Operating Instructions Manual

Page: 33 / 103

33
1 Special Instructions
The X-COUP is only designed for the cutting of construction products mainly on construction sites. Reading carefully this
manual is compulsory for any person for the use, maintenance, repair of this machine. Uses other than manufacturer's
instructions shall be considered as contravening the regulations. The manufacturer shall not be held responsible for any
resulting damage. Any risk shall be borne entirely by the user.
2 Safety instructions
• Read the instructions manual prior operating the machine the fist time.
• Remove all safety hazards in the working environment and make it accessible in case of accident. Any person not
involved in the work should leave the working area.
•
The operator must wear protective clothes including eye and ear protection!
• Make sure the machine is in a stable position.
• Never leave the machine unattended, untied or unlocked.
• Only fit diamond blades on the machine! Check for correct mounting and condition of the blade before using the
machine. Never use a damaged or badly worn blade.
• Do not move the machine while the blade is running idle.
•
Always cut with the blade guard in position.
• Always apply cooling water continuously while cutting!
• Check the electric cable periodically
3 Machine plate
Code Machine code Year Year of production øext Maximum blade diameter
Mod Machine name W Weight of the machine øint Bore diameter
Ser.N. Serial number P Power Min-1 Blade speed
Type Machine type EN Safety Standart
4 Pictograms
Read operator’s instructions Ear protection must be worn Rotation direction of the blade
Hand protection must be worn Eye protection shall be worn Danger: risk of cut