3. Settings
3.3.2 FACTORY MODE-UTIL1
FACTORY mode – Press
◀
button 2 seconds long on the remote control.
UTIL1 – NAVI MODEL
Definition of the navigation
resolution
DEFAULT : default, 400X234, in low
resolution
KD-900(WVGA) : 800x480 in high
resolution, for Chinese
LS-901(WQVGA) : 800x480 in high
resolution, for Chinese, Taiwan
WP9200(WVGA) : 800x480 in high
resolution, for Israel
GI-8000N 3D(WVGA) : 800x480 in high
resolution, for Korea
GI-5000A(WVGA) : 800x480 in high
resolution, for Korea
I-ONE(WVGA) : 800x480 in high
resolution, for Korea
PAPAGO(WQVGA) : 480x234 in low
resolution, for Taiwan
HDMI (when SMI installed): 800x480 in
high resolution
* Go into FACTORY/ IMAGE (as
shown right) and adjust the
position and the size of the
navigation after setting the
definition of the navigation
Setup for navigation
UTIL1 - CAR MODEL
Selecting model of the car
AUDI S4
AUDI A4
AUDI A6
AUDI A7
AUDI A8
AUDI Q3
AUDI Q5
AUDI Q7
* Set pin#5 of DIP switch to the
right size of the monitor after
selecting model of the car.
(Refer to page9.)
Setup for car model
16
www.car-solutions.com
www.car-solutions.com
