Version 17.02.2020
HW: 32
CI-VL2-UCON8-AO
P
a
g
e
9
2.3.
Connections to the head-unit – LVDS
Remove the head-unit and further
remove the original housing plastic frame
which is fixed to the head-unit housing by
4 Torx screws (T10).
Turn out the 4 Torx screws (T10) of the
head-unit housing. After disconnecting
the head unit’s mainboard, take both
parts together away from the head unit’s
mainboard housing and put them aside.
Turn out the Torx screw (T10) at the
middle of the head unit’s mainboard
housing and carefully put the housing
aside to set free the monitor panel with
its kopper coulored picture ribbon cable
Carefully clip out the kopper coulored 60pin ribbon cable at the monitor panel’s ribbon cable
base and lead it out.
Note:
The connected ribbon cables have to be handled with care to avoid each damage of
the sensitive electrical inducters.
