Version 17.02.2020
HW: 32
CI-VL2-UCON8-AO
P
a
g
e
10
Turn around the monitor panel and connect the previously become free copper coulored
60pin ribbon cable to the pre-assembled 60pin ribbon cable merger
„TO PNL OUT“
of the
daughter PCB box and clip it in (heed the following warning notes!).
Note:
Due to the very short length of the ribbon cable, there’s only limited space for
mounting available.
Turn around the monitor again and connect the pre assembled 60pin ribbon cable
„TO PCB IN“
of the daughter PCB box to the monitor panel’s previously become free
ribbon cable base (heed the following warning notes!).
After a check of the perfect ribbon cable connection, in reverse order fold back and clip in
the monitor panel to the head unit housing, connect the head unit mainboard and fix it to
the head unit’s rearside, before screwing on the head units frame again.
X
only with
NAV-FN900E
X
only with
NAV-FN900E
