Version 13.01.2015
CI-TF-SC14
Pa
ge
3
1.4.
Pin-assignments
Assignment
+12V permanent Pin 12
Ground Pin 15
CAN HIGH Pin 4
CAN LOW Pin 3
No liability for vehicle wire colors and pin definition!
Possible changes by the vehicle manufacturer. The given
information must be verified by the installer.
Pin-assignment of the CAN-Box TV-500 (Molex 8pin)
Cable colour
Pin-No. Assignment
●
Yellow
Pin 4
CAN-HIGH – connection to the head-unit
●
Blue
Pin 3
CAN-LOW – connection to the head-unit
●
● Yellow/Black Pin 8
CAN-HIGH – connection to the vehicle
●
● Blue/Black
Pin 7
CAN-LOW – connection to the vehicle
●
Red
Pin 1
+12V permanent
● Black
Pin 5
Ground
●
Green
Pin 6
Activation of the video-in-motion function
(+12V = TV-free activated)
●
White
Pin 2
Trigger output (+12V DC 500mA)
2.
Installation
Switch off ignition and disconnect the vehicle’s battery! If according to factory rules
disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle is
sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a
resistor lead.
Note
: The interface is installed on the backside of the navigation unit.
