Version 04.05.2017
CI-VL3-MBN51
P
a
g
e
5
1.3.
Connection Video-Interface
The video-interface converts the connected after-market sources video signals into a LVDS
signal which is inserted in the factory monitor using separate trigger options and it reads
vehicle’s digital signals out of the vehicle’s CAN-bus and converts them for the video
interface.
1.4.
Dip-switch settings
Some settings have to be selected by the 8 dip-switches at the
video-interface. Dip position down is ON and position up is OFF.
See following chapters for detailed information.
Dip
Function
ON (down)
OFF (up)
1
RGB-input
enabled
disabled
2
CVBS AV1-input
enabled
disabled
3
CVBS AV2-input
enabled
disabled
4
RGB-input resolution
800x480
1080p H+V sync
5
Rear-view cam type
after-market
factory or none
6
No function
-
set to OFF
7
No function
set to OFF
8
Monitor selection
7” monitor
8.4” HD monitor
