Version 28.07.2015
CI-VL2-CCC
p
ag
e
8
2.5.
Audio insertion
This interface can only insert video into the factory infotainment. The video can be activated
to any audio mode of the factory infotainment. If an AV-source is to be connected, the
source’s video out is connected to the video IN1 of the video interface and the source’s
audio out to the audio insertion. Audio insertion is possible by the AUX-in interface AUX-110,
factory audio AUX input, a Dension Gateway 500 or FM-modulator. The factory audio AUX
might be already available in the vehicle. If not, on most infotainments which are compatible
with this video interface, it can be coded by the dealership or by using one of our OBD-CCC-
X-xx coders.
2.6.
Connecting 2 AV-sources
If two AV-sources shall be connected, connect the included audio cable to audio-switch-port
of the video interface. When switching the video interface from video-IN1 to video-IN2, the
audio will also automatically be switched.
Audio pins
Definition
1/2
Audio input signal R/L of source IN2
3/4
Audio input signal R/L of source IN1
5/6
Audio output signal L/R of factory audio AUX,
AUX-110, Dension Gateway 500 or FM-
modulator
7
Ground
8
No function
Audio-cable
Video-interface
Audio-switch-
port
