Version 28.07.2015
CI-VL2-CCC
p
ag
e
4
Requirements
General
Monitor with 10pin LVDS video connector
Vehicle
3series (E90/91/92), 5series (E60/61),
6series (E63/64), X5 (E70), X6 (E71), and other vehicles
Navigation/Radio
Professional Navigation CCC
Business Navigation M-ASK up to about 2009
Radio with colour screen
Limitations
Ultra-wide mode
Only available for ultra-wide screens 8.8”
Video only
The interface inserts ONLY video into the infotainment,
for sound use the FM-modulator or factory AUX which can
be coded by dealership or our OBD-coders if not already
available in the vehicle or the AUX-in interface AUX-110 or
a Dension gateway 500.
Factory-OPS-display
While reverse gear is engaged ONLY the picture of the
after-market rear-view camera is visible!
1.2.
Checking the compatibility of vehicle and accessories
1.3.
Dip-switch settings
With the video interface boxes dip-switches it is possible to select vehicle/navigation the
interface is to be installed in (dip 6 to 8), to dis- or enable the interfaces inputs (dip 1 to 3)
and to preselect the type of camera which is (to be) installed (dip 5).
Dip position down is ON and position up is OFF.
1.3.1.
Vehicle selection (dip 6-8)
Choose the vehicle/navigation/monitor the interface is to be installed to and set dip 6
through 8 according to the below table.
Vehicle/Navigation
Dip 6
Dip 7
Dip 8
BMW CCC with 8.8” ultra-wide monitor
OFF
ON
ON
BMW CIC with 6.5” monitor
OFF
ON
OFF
