Version 17.02.2020
HW GD(V97)
CI-UCON5N
P
a
g
e
9
2.3.
Connections to the head-unit - LVDS
Remove the head-unit and further remove the original housing base plate, which is fixed to
the head-unit housing by 4 Torx screws (T9).
Clip out the head-unit housing at the head-unit control panel and fold it to the side,
like shown in the picture above.
Note: The connected ribbon cables have to be handled with care to avoid each
damage of the sensitive electrical inducters.
Position the Exchange housing base plate with the daugter PCB in place of the
original base plate
