Version 17.02.2020
HW GD(V97)
CI-UCON5N
P
a
g
e
12
2.4.
Head unit – frame customizing
To reinstall the head-unit’s DIN housing with the daughter PCB below, in most cases a
modification of the vehicle’s head unit frame is reqired. For that, the sheet metal plate
between the red marked lines has to be cut away, like shown in the following picture.
2.5.
Connection to head unit – 20pin RGB digital cable
Connect the 20pin RGB digital cable’s female 20pin connector to the male 20pin connector
of the video-interface.
Connect the male beige-coloured 20pin connector of the 20pin RGB digital cable to the
female 20pin connector of the daughter PCB.
Pay special attention to the cable’s direction because its connectors both seem to be
identical. (Strictly respect the lables
„MONITOR SIDE“
and
„BOX SIDE“
).
