Version 30.12.2021
HW: CAM(V100)/(V11+V41)
ab Serien Nr: NZ20NOV694
CI-RL4-SY3-R5
P
a
g
e
15
2.6.
Installation with analogue connection (without CAN bus)
If, after connecting the PNP harness, no interface LED lightens up while the ignition is turned
on, the interface must also be connected in analogue mode.
Connect the female 12pin connector of the 12pin interface cable to the male 12pin
connector of the video interface.
Connect the 12pin interface cable’s purple coloured wire
Manual ACC
to
+12V ACC
or
to
S-contact
terminal 86s +12V
(e.g. glove compartment illumination).
