Version 22.10.2021
HW:CAM(V98/99/100)/(V45/46)
CI-RL4-MBN6
P
a
g
e
20
2.3.7.
Power supply output
The red power supply output
ACC/front cam out 12V (max 3A)
can be used to power an
external source and has a different assignment depending on the position of dip switch 1 (of
the black 8 dips):
Dip
Function
Dip 1
ON
+12V (max. 3A) when reverse gear is engaged incl. 10 seconds
delay after reverse gear is disengaged and
+12V by manual switching to front camera by keypad (short
press)
Dip 1
OFF
+12V (max. 3A) simulated ACC (while CAN has activity)
2.3.7.1.
After-market front camera
The red power supply output
ACC/front cam out 12V (max 3A)
can be used to power a front
camera. If Dip 1 is set to ON (of the black 8 dips), the power supply output su12V
(max 3A) when the reverse gear is engaged and additionally
10 seconds delay after reverse gear is disengaged.
Note:
In addition, a manual switch-over to the front camera input is possible via keypad
(short press) from any image mode. The power supply output su12V then, too (if Dip
1 is set to ON and the front camera input is selected).
