Version 22.10.2021
HW:CAM(V98/99/100)/(V45/46)
CI-RL4-MBN6
P
a
g
e
17
2.3.4.3.
Installation with analogue connection (without CAN-Bus)
Connect the enclosed 12pin interface cable’s female 12pin connector to the male
12pin connector of the video interface.
Connect the purple coloured wire
Manual ACC
of the 12pin interface cable to
S-contact terminal 86s +12V
(e.g. glove compartment illumination).
Note:
Only as long as the video interface is switched on via +12V and Manual ACC,
the MBUX screen is also switched on. Otherwise, the factory picture is black.
When selecting the switch signal, please check whether the factory picture is
available in all desired operating states.
With analogue connection of the video interface (without CAN bus), the connection
of the rear-view camera must also be made manually.
(see point
2.3.5.2
.: Case 2: Interface does not receive a reverse gear signal).
