Version 24.09.2020
HW: CAM(V31)/(V22)
CI-RL2-MTC
P
a
g
e
16
2.9.
Picture settings
The picture settings are adjustable by the 3 push-buttons on the video-interface. Press the
MENU button to open the OSD settings menu or to switch to the next menu item. Press UP
and DOWN to change the selected value. The buttons are placed inside in the housing to
avoid accidental changes during or after the installation. Picture settings must be done
separately for RGB, AV1 and AV2 while the corresponding input is selected and visible on the
monitor.
AV2 and CAM share the same settings which must be adjusted in AV2.
Note:
The OSD menu is only shown when a working video source is connected to the
selected video-input of the interface.
The following settings are available:
Contrast
Brightness
Saturation
Position H (horizontal)
Position V (vertical)
IR-AV1/2 (no function)
Guide L/R 8no function)
UI-CNTRL (no function)
Size H/V (picture size horizontal/vertical)
