Version 24.09.2020
HW: CAM(V31)/(V22)
CI-RL2-MTC
P
a
g
e
11
2.5.
Connection - picture signal cable
Connect the enclosed picture signal cable’s female waterblue coloured HSD+2
connector to the male waterblue coloured HSD+ 2 connector of the video interface.
Disconnect the factory picture signal cable’s female 4pin HSD connector
at the rear
side of the factory monitor
and connect it to the purple colored male 4pin HSD
connector of the enclosed picture signal cable.
Attention: The factory picture signal cable has to be kept connected to the head unit during the
installation prozess!
Connect the picture signal cable’s waterblue coloured female 4pin HSD connector to
the previously become free white coloured male 4pin HSD connector at the rear side
of the factory monitor.
