24
PTZ SETUP
ID: Use the mouse wheel to change speed dome camera ID.
LEFT-RIGHT SPEED: Use the mouse wheel to change the left-right speed.
UP-DOWN SPEED: Use the mouse wheel to change the up-down speed.
AUTO SPEED: Use the mouse wheel to change the auto patrol speed.
BAUD RATE: Use the mouse wheel to change the BAUD rate.
PROTOCOL: Use the mouse wheel to change the connection protocol
Note: Above is only possible if the connected PTZ Camera allows this mode of
activation from DVR
E.
AUDIO CONTROL
Press this button to turn the audio on or off
F.
DISPLAY CONTROL
Within live-viewing or playback mode, use display control to switch the camera
channel.
G.
RECORD AND PLAYBACK CONTROL
Same as front panel controller and remote controller.
NOTE
: Display the type of the event as follows.
POWER
If the DVR got power loss, it will record the date and time of
rebooting only.
RECORD
If
REC.
button has been pressed, it will record the date and time in the event
list.
V.LOSS
When a camera signal is lost, it will record the date, time, and channel
number. Moreover, the
icon will display on the corresponding channel.
ALARM
When ALARM is triggered, it will record the date, time, and channel
number. Moreover, the
icon will display on the corresponding channel.
MOTION
When MOTION is detected, it will record the date, time, and corresponding
channel. Moreover, the
icon will display on the corresponding
channel.
