12
3
4
For models(BCC3B14ANG & BCC5B14ANG), install NG Regulator and 12 Foot Hose
Remove two pre-installed screws from NG Regulator. Keep them for the next step.
Install the NG Regulator onto the Right Cart Side Panel using the reserved 2 screws and tighten
securely.
Connect the swivel nut of 12 Foot Hose to NG Regulator inlet as shown.
Insert Side Burner Gas Valve stem through the hole on the front of the Side burner Frame. Then
place the Control Knob Seat over the gas valve stem, aligning the holes on the Knob Seat, Side
Burner Frame and Gas Valve Assembly, tighten securely using two (2) M4x12 Phillips Head Screws.
Bend the aluminum tube softly. Secure the Side Burner Base at the end of aluminum tube under
the Side Burner Seat using two (2) M4x12 Phillips Head Screws as shown and tighten securely.
Make sure the Electrode goes through the hole on the Side Burner Seat.
Install Control Knob onto Gas Valve stem with OFF position pointing up.
Install Side Burner Gas Valve Assembly and Control Knob Seat
Control Knob Seat
Control Knob
NG Regulator
Inlet Fitting
Swivel Nut
12 Foot Hose
Phillips Head Screw
3/16"x3/8"
Qty. 2
Part # S112G03061
Already installed
in NG Regulator
(EE)
Phillips Head Screw
M4X12
Qty. 4
Part # S112M0412A