background image

27

Instruction manual WMi4001

Please keep this instruction manual for future reference 

S P I N

The programme carries out a maximum spin. It is possible to delete or reduce the spin with the 

SPIN SPEED

 button.

D R A I N

This programme drains out the water.

R A P I D   ( 1 4 ’ - 3 0 ’ - 4 4 ’ )

Washing cycle suggested for low loads and slightly dirty loads. With this programme it is 
recommended to reduce the quantity of detergent normally used, in order to avoid unnecessary 
waste. 

Use the RAPID button to select one of three programmes available.

DA R K   C O L O U R S

Programme designed to mix all dark garments, avoid the loss of colour and the formation of 
creases. We recommend the use of liquid detergent.

S H I RT S

The washing cycle is optimised to reduce the creation of creases, keeping an excellent washing 
performance. It is also possible to further reduce the spin speed, to ensure easier ironing.

S I L K

Dedicated programme for silk fabrics that are machine washable. The rotations of the drum are 
delicate, the temperature does not exceed 30°C and the programme ends with a gentle spin.

WO O L

This programme performs a wash cycle dedicated to the wool fabrics that can be washed in a 
washing machine.

H A N D WA S H

A gentle programme for hand wash only fabrics with a slow spin.

Summary of Contents for WMI4001





































Reviews: