22 Instruction manual WMi4001
Please keep this instruction manual for future reference
T E M P E R AT U R E S E L E C T I O N B U T TO N
This button allows you to change the temperature of the wash cycles.
It is not possible to raise the temperature over the maximum allowed for the programme, in
order to protect the fabrics.
If you want carry out a cold wash all the indicators must be off.
S P I N S P E E D B U T TO N
› By pressing this button, it is possible to reduce the maximum speed, and if you wish, the
spin cycle can be cancelled.
› If the label does not indicate specific information, it is possible to use the maximum spin
expected in the programme.
› To prevent damage to the fabrics, it is not possible to increase the speed over the maximum
allowed for the programme.
› To reactivate the spin cycle press the button until you reach the spin speed you would like
to set.
› It is possible to modify the spin speed without pausing the machine.
An overdosing of detergent can cause excessive foaming. If the appliance detects the presence
of excessive foam, it may exclude the spinning phase or extend the duration of the programme
and increase water consumption.
The machine is fitted with a special electronic device, which prevents the spin cycle should the
load be unbalanced. This reduces the noise and vibration in the machine and so prolongs the
life of your machine.
N I G H T & DAY B U T TO N
This option reduces the intermediate spin speed to 400rpm, where applicable, increases the
water level during rinsing and keeps the laundry immersed in water after the final rinse.
During the phase in which the water is held in the tub, the relevant indicator light blinks to
show that the machine is at a standstill.
Deselect the option to end the cycle with a spin dry (which may be reduced or cancelled using
the appropriate button).
Due to the electronic control, the water in the intermediate phases is emptied silently, making
this option very useful for washing at night.
