6
a.Remove the shelf, and remove the screw(1,2,3,4) of the middle air-duct cover
(Fig.5)
.
(Please noted: one the below diagram, the diagram on the right side is to desribe the spare parts on the PCB board. If
there is any similar situation, use the same method. )
Fig.5
b.Pull out electric box to expose the control panel as per the direction of arrowhead, then unplug all the connectors
from the control panel, and remove electric box (A). See
(Fig.6)
There are two version of PCB board, as we seldom use the old version, and we do not give any statement, and please see the
new version as below
(Fig.7)
Fig.6
